Ariston L 64 Technical Information PDF herunterladen (Seite 10)

installation

Reference Standards

In the United Kingdom, the installation and initial

start-up of the boiler must be by a CORGI registered

installer in accordance with the installation standards

currently in eect, as well as with any and all local

health and safety standards i.e. CORGI.

In the Republic of Ireland the installation and initial

start-up of the appliance must be carried out by a

Competent Person in accordance with the current

edition of I.S.813 “Domestic Gas Installations” and

the current Building Regulations, reference should

also be made to the current ETCI rules for electrical

installation.

The installation of this appliance must be in

accordance with the relevant requirements of the

Local Building Regulations, the current I.E.E. Wiring

Regulations, the by-laws of the local authority, in

Scotland, in accordance with the Building Standards

(Scotland) Regulation and Health and Safety

document No. 635, “Electricity at Work Regulations

1989” and in the Republic of Ireland with the current

edition of I.S. 813 and the Local Building Regulations

(IE).

C.O.S.H.H.

Materials used in the manufacture of this appliance

are non-hazardous and no special precautions are

required when servicing.

Codes of Practive

Installation should also comply with the following

British Standards Code of Practice:

BS 7593:1992 Treatment of water in domestic

hot water central heating

systems

BS 5546:1990 Installation of hot water supplies

for domestic purposes

BS 5440-1:2000 Flues

BS 5440-2:2000 Air supply

BS 5449:1990 Forced ciculation hot water

systems

BS 6798:2000 Installation of gas red hot

water boilers of rated input not

exceeding 70kW

BS 6891:1989 Installation of low pressure gas

pipes up to 28mm

BS 7671:2001 IEE Wiring Regulations

BS 4814:1990 Specication for expansion

vessels

BS 5482:1994 Installation of L.P.G.

Domestic heating compliance

guide

and in the Republic of Ireland in accordancce with

the following codes of practice:

I.S. 813 Domestic Gas Installations

Avoid installing the boiler where the air inlet can

be polluted by chemical products such as chlorine

(swimming pool area), or ammonia (hair dresser), or

alkalin products (launderette).

Flue

Detailed information on ue assembly can be found

in the “Connecting the Flue” section.

The boiler must be installed so that the ue terminal

is exposed to the free passage of external air at all

times and must not be installed in a place likely to

cause nuisance. It must not be allowed to discharge

into another room or space such as an outhouse or

closed lean-to.

Condensing boilers have a tendency to form a plume

of water vapour from the ue terminal due to the low

temperature of the ue gasses. The terminal should

therefore be located with due regard for the damage

or discolouration that may occur to building within

the vicinity and consideration must also be given

to adjacent boundaries, openable windows the min

acceptable clearances are shown opposite.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 55 56

Kommentare zu diesen Handbüchern

Keine Kommentare

Ariston L 64 Technical Information Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Geschirrspüler Ariston L 64